Simpure Y7P-BW UV Countertop Reverse Osmosis Water Filter (Black)

How much space does this system need on my countertop?

The system measures 45.7cm long, 20.3cm wide and 43.2cm tall. It needs at least 56cm of vertical clearance when the lid opens fully. You can place it under cabinets if you have 56cm clearance, or use it on open countertops, kitchen islands, or tea tables. The compact footprint takes up minimal counter space whilst providing maximum filtration capability.

What contaminants does this system actually remove?

The system removes 99.99% of over 1,000 contaminants including PFAS/PFOA/PFOS, heavy metals like lead and arsenic, chlorine, fluoride, nitrates, nitrites and total dissolved solids. It's NSF/ANSI 58 certified and SGS tested. The UV system adds protection against bacteria and viruses. Testing shows TDS reduction from over 800ppm to under 10ppm in real-world conditions.

How often do I need to change the filters and what do they cost?

Filters last for 528 gallons or approximately 6 months with typical household use. The system includes both CF (composite) and RO (reverse osmosis) filters that twist out easily without tools. Replacement filter sets typically cost around £80-100, making the per-gallon cost significantly lower than bottled water whilst eliminating plastic waste.

Does this system waste a lot of water like other RO systems?

No, this system is highly efficient with a 4:1 pure-to-drain ratio. For every 4 litres of clean water produced, only 1 litre goes to drain. Traditional under-sink RO systems often waste 3-4 litres for every litre of clean water. The innovative recycling technology saves up to 1,500% more water, making it environmentally friendly and cost-effective.

Can I use this system with well water or just mains water?

The system works with both mains water and well water, provided the TDS (total dissolved solids) level is below 500ppm. Many users report excellent results with well water, reducing TDS from 800+ ppm to under 10ppm. The multi-stage filtration handles sediment, minerals and contaminants commonly found in well water. Test your water first if you're unsure about TDS levels.

How long does it take to fill the tank and dispense water?

The 1.3-gallon tank takes approximately 30-45 minutes to fill initially. Once filled, dispensing is fast - you can fill a cup in about 15 seconds with the 418 GPD flow rate. The system includes preset buttons for 6oz, 12oz and 15oz portions, plus continuous flow for larger containers. The tank refills automatically as you use water.

Is the system noisy when operating?

The system operates quietly during normal dispensing. You'll hear some noise when the tank refills after use, similar to a coffee machine or small appliance. The UV system runs silently. Most users find the noise level acceptable and much quieter than many traditional RO systems. The refill cycle only runs when needed, not continuously.

What's included in the box and do I need any additional parts?

The box includes the complete Y7P-BW unit with pre-installed CF/RO filters, user manual and removable drip tray. Everything needed for immediate use is included - no additional parts, tools, or installation materials required. Simply unbox, flush the system as directed and start filtering. The only ongoing requirement is periodic filter replacement every 6 months.