Termoidraulica RV Direct Reverse Osmosis System (70 Lt/H, Vane Pump)

What is the actual water production rate of this system?

The system produces 70-80 litres per hour when equipped with the standard 100GPD Ionicore membranes. This production rate assumes normal water pressure and temperature conditions. The actual output may vary slightly based on inlet water quality, temperature and pressure. The dual membrane configuration ensures consistent flow rates even as individual membranes age.

How often do the filters and membranes need replacement?

The carbon block and sediment filters typically require replacement every 6-12 months depending on water quality and usage volume. The Ionicore membranes generally last 2-3 years with proper maintenance. The system's electronic controls monitor filter condition and will indicate when replacement is needed. Regular maintenance ensures optimal performance and water quality.

Can this system be installed in very small spaces?

Yes, the system's compact design at only 10.8cm wide makes it perfect for tight installation spaces. The total dimensions are 45cm height, 10.8cm width and 42cm depth. This narrow profile allows installation under most kitchen sinks or in utility cupboards where space is limited. The system includes all necessary mounting hardware and connection fittings.

What certifications does this system have?

The system is certified according to Italian Ministry standards D.M.25 of 07.02.12 and D.M. 174 of 06.04.04. These certifications ensure the system meets strict safety and performance requirements for domestic water treatment equipment. The Ionicore membranes are manufactured in the USA to NSF standards for additional quality assurance.

How does the TDS regulator work?

The TDS (Total Dissolved Solids) regulator allows you to adjust the mineral content in the output water according to your taste preferences. This feature blends a small amount of filtered inlet water with the pure RO water to restore beneficial minerals. You can adjust from completely demineralised water to water with moderate mineral content for better taste.

What happens if there is a water leak?

The integrated water stop system automatically detects pressure anomalies and immediately shuts off water flow to prevent damage. This safety feature monitors system pressure continuously and triggers within seconds of detecting a leak. The electronic control unit will display an error code and the system remains locked until the issue is resolved and manually reset.

Does the system require electricity to operate?

Yes, the system requires 230V 50Hz electrical supply to power the vane pump, electronic controls and safety systems. The air-cooled motor and electronic control unit consume minimal power during normal operation. The system includes a standard Italian 3-pole plug (Type L) and may require an adapter for UK electrical outlets.

How does the self-flushing feature work?

The self-flushing system automatically activates when the unit detects prolonged periods without water production. This feature purges stagnant water from the membrane chambers and flushes away accumulated contaminants. The process typically runs for 2-3 minutes and helps maintain membrane performance and prevent bacterial growth during idle periods.